Impulse 23.3 Tool

Owned by Fabrice NSONGO
Last updated: 03 Oct, 2023 by Kévin Chopier
5 min read

tool_22.3.0.2-v0: tool_22.3.0.2-v0

tool_22.1.0.1-v0: tool_22.1.0.1-v0

Introduction

NanoXplore provides a tool in order to compute:

  • NX_PLL parameters : Generate parameters to set when instantiate NX_PLL in VHDL code

  • NX_WFG parameters : Generate parameters to set when instantiate NX_PLL in VHDL code

  • confineModule constraints: Generate constraints to set to create and confine modules

 

Examples

NX_PLL

User needed PLL

$ make pll_calculator_interface pll_calculator_interface Please set the variant ? 1 - NG-MEDIUM 2 - NG-LARGE 3 - NG-ULTRA 3 How the reference clock is generated ? 1 - External 2 - Internal (internal oscillator) 1 What is the reference clock frequency in MHz ? 50 Do you want to set a VCO frequency or let the tool research automatically ? 1 - Set VCO frequency 2 - Automatical research with 1st output clk 2 How many output clocks do you want to generate in the range [0;9] ? 2 What is the frequency of the output clock 0 in MHz ? 400 What is the frequency of the output clock 1 in MHz ? 200 //////////PLL setting////////// |Signal |Frequency (MHz)| |------ |-------------- | |Ref |50.0 | |Ref_int|50.0 | |VCO |800.0 | |------ |-------------- | |DIVD5 |400.0 | |DIVD4 |200.0 | //////////PLL parameters////////// ref_osc_on => '0' , ref_intdiv => 0 , fbk_int_div => 7 , clk_outdiv1 => to_bitvector(conv_std_logic_vector(0,3)) , clk_outdiv2 => to_bitvector(conv_std_logic_vector(0,3)) , clk_outdiv3 => to_bitvector(conv_std_logic_vector(0,3)) , clk_outdiv4 => to_bitvector(conv_std_logic_vector(0,3)) , clk_outdivd1 => to_bitvector(conv_std_logic_vector(0,4)) , clk_outdivd2 => to_bitvector(conv_std_logic_vector(0,4)) , clk_outdivd3 => to_bitvector(conv_std_logic_vector(0,4)) , clk_outdivd4 => to_bitvector(conv_std_logic_vector(1,4)) , clk_outdivd5 => to_bitvector(conv_std_logic_vector(0,4))

 

All available PLL

$ make pll_all_values_interface pll_all_values_interface Please set the variant ? 1 - NG-MEDIUM 2 - NG-LARGE 3 - NG-ULTRA 2 How the reference clock is generated ? 1 - External 2 - Internal (internal oscillator) 1 What is the reference clock frequency in MHz ? 50 //////////PLL Output Values////////// CLK (MHz),VCO (MHz),CLK name,ref_osc_on,ref_intdiv,fbk_int_div,clk_outdivp1,clk_outdivp2,clk_outdivp3o2,clk_outdivo1 0.390625,200.0,DIVP3,'0',0,0,0,0,7,0 0.390625,200.0,DIVP3,'0',1,2,0,0,7,0 0.48828125,250.0,DIVP3,'0',1,3,0,0,7,0 0.5859375,300.0,DIVP3,'0',0,1,0,0,7,0 0.5859375,300.0,DIVP3,'0',1,4,0,0,7,0 0.68359375,350.0,DIVP3,'0',1,5,0,0,7,0 0.78125,400.0,DIVP3,'0',0,2,0,0,7,0 0.78125,400.0,DIVP3,'0',1,6,0,0,7,0 0.78125,200.0,DIVP3,'0',0,0,0,0,6,0 0.78125,200.0,DIVP2,'0',0,0,0,7,0,0 0.78125,200.0,DIVP3,'0',1,2,0,0,6,0 0.78125,200.0,DIVP2,'0',1,2,0,7,0,0

WFG

$ make wfg_calculator_interface wfg_calculator_interface What is the input clock frequency in MHz ? 100 What is the output clock frequency in MHz. It has to be input clock frequency divided by power of 2 in the range [6.25;100.0]? 25 For how many input clock cycles do you want to shift output clock in the range [0;2] ? 1 On which edge of input clock do you want to generate output clock ? 1 - Rising edge 2 - Falling edge 1 //////////WFG parameters////////// mode => '1' , wfg_edge => '1' , pattern => "0110011001100110" , pattern_end => 15

 

constrainModules

constrainModules

 

statModules

compareProjects

compareInstances

compareSta

 

© NanoXplore 2022