PCB Designator | Label | Position | Comment |
|---|---|---|---|
J3 | MOD0 | 1-2 | Mode 0 => Normal0 |
J1 | MOD1 | 1-2 | |
J7 | BOOT_SRC | 1-2 | Boot source is SPI-FLASH |
J8 | JTAG_SELECT | closed | JTAG from ANGIE connector |
J29 | SCL/GPIO6 | open | SCL not connected to GPIO6 |
J30 | SDA/GPIO7 | open | SDA not connected to GPIO7 |
J32 | Cfg ID0 | open | FPGA Identification = 0x0 |
J34 | Cfg ID1 | open | |
J33 | Cfg ID2 | open | |
J35 | Cfg ID3 | open | |
J36 | FL N0 | open | Flash number = 0x0 |
J38 | FL N1 | open | |
J37 | FL MODE | 1-2 | Flash mode is sequential |
J39 | GPIO OUT | closed | All GPIO must be connected to the Cortex-R52 |
General
Content
Integrations