Table of Content
...
Ports | Direction | Type | Description |
REF | In | std_logic | Reference clock input Connectivity: semi-dedicated clock inputs, clock trees (low skew network) Note: If REF pin is connected to a PAD, please declare the pad with Turbo mode enabled. |
FBK | In | std_logic | External FeedBack input Connectivity: semi-dedicated clock inputs, clock trees (low skew network) |
VCO | Out | std_logic | VCO output : Fvco = fbk_intdiv * 2**(fbk_div_on - ref_div_on + 1) * clk_ref_freq Connectivity: WFG inputs |
D1…D3 | Out | std_logic | Divided clocks. Fvco frequency divided by 1, 2, 4, 8, 16, 32, 64 or 128 Important note: D1, D2 and D3 outputs are reset while PLL RDY is not asserted. Connectivity: WFG inputs |
OSC | Out | std_logic | Internal 200 MHz oscilator Connectivity :WFG inputs, delay calibration system |
RDY | Out | std_logic | High when PLL is locked Connectivity: RDY inputs of WFGs, fabric… |
...
Ports | Direction | Type | Description |
REF | In | std_logic | Reference clock input Connectivity: semi-dedicated clock inputs, clock trees (low skew network) Note: If REF pin is connected to a PAD, please declare the pad with Turbo mode enabled. |
FBK | In | std_logic | External FeedBack input Connectivity: semi-dedicated clock inputs, clock trees (low skew network) |
R | In | std_logic | Active high Reset input. Must be activated when REF input frequency changes to force a re-locking process of the PLL |
VCO | Out | std_logic | VCO output: - Internal feedback: Fvco = 2 * (fbk_intdiv + 2) * clk_ref_freq / (ref_intdiv + 1) - External feedback: Fvco = (pattern_end + 1) / n_sim_pat * clk_ref_freq / (ref_intdiv + 1) Where n_sim_pat is the number of similar patterns sequence found in pattern_end+1 MSB bits of pattern. |
REFO | Out | std_logic | Output of the REFerence divider. The division factor is set by the generic “ref_intdiv” |
LDFO | Out | std_logic | Output of the FBK_INTDIV divider. The division factor is set by the generic ‘fbk_intdiv” |
DIVP1 | Out | std_logic | This output delivers a divided VCO frequency (by a power of 2). The division factor is set by the generic “clk_divoutp1” |
DIVP2 | Out | std_logic | This output delivers a divided VCO frequency (by a power of 2). The division factor is set by the generic “clk_divoutp2” |
DIVP3 | Out | std_logic | This output delivers a divided VCO frequency (by a power of 2). The division factor is set by the generic “clk_divoutp3o2” |
DIVO1 | Out | std_logic | This output delivers a divided VCO frequency (by an odd factor). The division factor is set by the generic “clk_divouto1” |
DIVO2 | Out | std_logic | This output delivers a divided VCO frequency (by an odd factor). The division factor is set by the generic “clk_divoutp3o2” |
OSC | Out | std_logic | 200 MHz coming from 400MHz internal oscilator Connectivity :WFG inputs, delay calibration engine |
PLL_LOCKED | Out | std_logic | High when PLL is locked Connectivity: RDY inputs of WFGs, fabric… |
CAL_LOCKED | Out | std_logic | High when the automatic calibration procedure of the current FPGA quarte area is complete Connectivity: fabric |
...
Synchronizing WFG together can be useful if output clocks must be synchronous. It is made by getting the same source clock for Master and Slave WFG and connecting SO from Master WFG to Si of Slave WFG.
| Note |
|---|
When sampling the input clock, the synchronization input must be connected either to another WFG (using pattern) synchronization output or to the synchronization output of the WFG itself. If synchronization comes from another WFG, both WFG must get the same pattern_end value. |
...
Synchronizing WFG together can be useful if output clocks must be synchronous. It is made by getting the same source clock for Master and Slave WFG and connecting SO from Master WFG to Si of Slave WFG.
| Note |
|---|
When sampling the input clock, the synchronization input must be connected either to another WFG (using pattern) synchronization output or to the synchronization output of the WFG itself. If synchronization comes from another WFG, both WFG must get the same pattern_end value. |
...