Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The NG-ULTRA development kit is your fastest path to evaluate and bring-up your solution on our quad-core ARM Cortex R52 SoC with DDR2 SDRAM and our eFPGA matrice with 540KLUTs/ 32256 Kbits RAM and HSSL.

Connectivity options for rapid application development:

  • 1 SpaceWire interface for boot and Application Software connected to the SoC

  • 2 SpaceWire socket for your SpaceWire soft IP connected to the eFPGA.

  • 768MB DDR2 SDRAM for SoC Application Software or direct access from FPGA matrice

  • 256MB DDR3 SDRAM

  • Support full FMC Standard compatible with SpaceWire/SpaceFibre and JESD204B ADC/DAC board

  • 4x512Mbits Quad SPI available for boot or Data.

  • Debugging your Application Software through dual MICTOR connectors for JTAG + TRACE32 for ARM-R52 quad core

Featured NG_ULTRA Devices (BGA1760):

System on chip

Quad internal ARM Cortex R-52 processor

eRAM: 2MB Data + 0.25MB ECC

eROM : 128KB (Core #0)

128 bits width DDR controller + ReedSolomon

DMA controller

7x PLLs

Monitoring and error management

8x GPIOs

1x UART Interface

1x Spacewire Interface

4x Quad SPI Flash memory Interface

Voltage and Temperature sensors

FPGA

540K LUTs

505K DFF

672 x RAM Blocks (48K-bit)

2 632x Register File Blocks (32 x 18-bit)

1 344x DSP

8x HSSL banks with 4 transceivers / 33 pins each.@ 12.5 GHz

10x Complex Banks / 34 pins each @ 800 MHz

4x Direct Banks / 24 pins each @ 200 MHz

Board Features:

Configuration

Spacewire

QSPI

Single,TMR,Sequential

JTAG

Memory

4xQuad SPI

4x512Mbits

DDR2 SDRAM

6 package x 16 bits width. (Total 768MB)

DDR3 SDRAM

256 MB/ width : 16 bits

Control I/O

GPIO (e-FPGA)

20 pins HE10 connector

GPIO (SoC)

8 leds + HE10 ouputs

switches

8

pushbuttons

8

LEDS

8

Communication

USB connector

Dual USB to RS232 Bridge

Spacewire

2 socket connectors

Spacewire

1 Spacewire connected to SoC

Clocking

Reference Clock SoC

25MHz clock crystal oscillator/external global clock input on SMA (20-100MHz)

Reference Clock for HSSL

External or on-board programmable reference clock

Debugging and monitoring

Board Temperature sensor

Dual MICTOR 38 pins connectors

JTAG + TRACE 32 bits for ARMR52 quad cores

Board compatibility

SpaceWire/SpaceFiber expansion board

Star-Dundee

XM105 debug board

only with Mictor and GPIOs

XTS-FMC board

HSSL tests

DAC37J84EVM

4xDAC @1600 MSPS / 16 bits / 4 Tx lanes used.

ADS42JB49EVM

2xADC @156.25 MSPS / 14 bits. 2 Tx lanes used

  • No labels