Page Comparison

...

Info
You should install nxbase2 (and get nxbase2_cli on your PATH) to use this module with a bringup board.

Info
You should use an Angie probe to use this module with the ngultra devkit

Info
You will find the documentation to flash your Sonoff s26 plug at the top level oh this project.

Anchor
libnxembeddedtools.hw.reboot.Reboot
libnxembeddedtools.hw.reboot.Reboot
class libnxembeddedtools.hw.reboot.Reboot(ip, boardType=1)

Bases: object

Anchor
libnxembeddedtools.hw.reboot.Reboot.NGULTRA_BRINGUP
libnxembeddedtools.hw.reboot.Reboot.NGULTRA_BRINGUP
NGULTRA_BRINGUP = 0

Anchor
libnxembeddedtools.hw.reboot.Reboot.NGULTRA_DEVKIT
libnxembeddedtools.hw.reboot.Reboot.NGULTRA_DEVKIT
NGULTRA_DEVKIT = 1

Class used to electrally reboot your board.

Parameters:

boardType (int) – Type of the board. May be Reboot.NGULTRA_BRINGUP or Reboot.NGULTRA_DEVKIT
ip (str) – IP of your Sonoff plug.

Anchor
libnxembeddedtools.hw.reboot.Reboot.powerOff
libnxembeddedtools.hw.reboot.Reboot.powerOff
powerOff(): Send a power off request to the plug.

Anchor
libnxembeddedtools.hw.reboot.Reboot.powerOn
libnxembeddedtools.hw.reboot.Reboot.powerOn
powerOn(): Send a power on request to the plug.

Anchor
libnxembeddedtools.hw.reboot.Reboot.startSPI
libnxembeddedtools.hw.reboot.Reboot.startSPI
startSPI(flashNr, external=False, tmr=False)

Reboot the board in SPI flash mode using nxbase2.

Parameters:

flashNr (int) – First flash used to boot.
external (Boolean) – Use external flash as flash#3.
tmr (Boolean) – Use TMR mode for flash#0-#3.

Anchor
libnxembeddedtools.hw.reboot.Reboot.startSpacewire
libnxembeddedtools.hw.reboot.Reboot.startSpacewire
startSpacewire(external=False, tmr=False)

Reboot the board in spacewire mode using nxbase2.

Parameters:

external (Boolean) – Use external flash as flash#3.
tmr (Boolean) – Use TMR mode for flash#0-#3.

...

Versions Compared

Old Version 1

New Version Current

Key