Page Comparison

...

1. Before install Impulse, check that Python 3.6 is installed with below command:

   Code Block
   $> which python3

   If Pyhton3 is installed you will see the following line:

   Code Block
   $> /usr/bin/python3

2. If Python3 is not installed, run the following command:

   Code Block
   $> sudo yum install python3

3. To install Impulse, update ~/.bashrc file with below instruction:

   Code Block
   export PATH=/opt/NanoXplore/impulse-/bin:$PATH

   Check that ~/.bashrc updating has been taken into account with below command:

   Code Block
   $> source ~/.bashrc”

4. Check that Impulse is installed with below commands:

   Code Block
   $> which impulse

   The result of this command must be the following

   Code Block
   $> /opt/NanoXplore/impulse-version/bin/impulse

5. Check that Impulse works correctly with the following command:

   Code Block
   $> impulse -version

   The result of this command must be the following

   Image RemovedImage Added

How to Install NxBase2

To Follow these stepqs to install the NxBase2 tool:

1. Update the ~/.bashrc file using the following instruction:

   Code Block
   export PATH=/opt/NanoXplore/NxBase2-2.5.3/install_cst/centos6/nxbase2_cli:$PATH

2. Check that NxBase2 has been installed and works correctly with below commands:

   Code Block
   $> which nxbase2_cli $> nxbase2_cli --version

...